Short answers to the questions people ask most when choosing a deck stain color. Each one links to a guide with more detail.
What color should I stain my deck?
Pick a color that suits your house and the wood it goes on, then test it on your own boards. Start with the outside of the house: the siding, the trim, any brick or stone, and the yard around the deck. Warm siding (cream, tan, yellow or warm gray) usually pairs with honey, cedar and warm brown stains. Cool siding (blue-gray, white or charcoal) tends to look sharper with driftwood, gray or deep espresso. How to Choose a Deck Stain Color has guides for grey, white and brick houses.
What is the most popular deck stain color?
Gray and solid colors get the most searches, and gray decks have been the leading trend for more than ten years. On pressure-treated decks, warm mid-tones such as cedar and honey are the most common choice, because they work with the wood’s own undertones.
Should my deck stain match my house?
A deck stained close to the siding color usually looks flat, because the wall and the deck floor run together. Some contrast looks better: a warm stain against cool siding, or a shade clearly lighter or darker than the house.
What is the difference between transparent, semi-transparent and solid deck stain?
The difference is how much of the wood you can still see. Transparent stain adds color and leaves the wood’s grain and natural look visible. Semi-transparent stain adds more color and lets some of the grain show through. Solid stain forms a film on top of the boards that hides the grain, so it behaves more like paint. Deck Stain Color Types covers each one.
Which deck stains don’t peel?
Penetrating stains don’t peel, because they soak into the wood and leave no film on the surface to crack or lift. Film-forming finishes such as solid stain and paint sit on top of the wood, and they crack and peel when the wood moves under them. A penetrating stain is maintained by cleaning the deck and putting more stain on, with no stripping.
Does more pigment mean less wood grain shows?
The kind of pigment decides how much grain shows, not the amount. Transparent iron oxide pigments block UV but let visible light through, so a stain loaded with them still shows the grain. Clay and earth pigments are the ones that look muddy.
Does a clear deck sealer protect against the sun?
A clear sealer with no pigment gives very little protection from the sun, and the wood turns gray under it. If you want UV protection, pick a tinted stain. Pigments such as transparent iron oxides are what block UV.
Do darker deck stains last longer?
A darker color does not make a stain last longer. The type of pigment decides how a stain holds up, not how deep the color is.
Do dark deck stains get hot?
Dark deck stains absorb more of the sun’s heat than light ones, so a dark deck in full sun can get uncomfortable underfoot on hot afternoons. Medium and light tones such as cedar, honey and driftwood stay cooler.
Will deck stain look like the color sample?
A color sample is only a starting point, because the wood under the stain changes the color. The same stain looks different on pine, cedar and redwood, on new and weathered boards, and in sun and shade. A cedar-tone stain can turn yellow or green on pressure-treated pine and red on cedar. Wet stain also looks darker than it will once it dries.
Does pressure-treated wood change how stain color looks?
Fresh pressure-treated wood has a green tint from the copper-based preservatives used to treat it. The tint shows most under lighter, warmer stain colors. It fades as the wood dries and weathers outdoors, often within a few months. The pressure-treated wood guide explains how to plan around it.
How do I test a deck stain color before buying?
Put your top two or three colors on separate boards or a hidden part of the deck, and let each one dry for 24 to 48 hours before you judge it. Then look at the samples in morning light, in afternoon light and on an overcast day. If you want a warm wood tone, Woodrich’s $15 Timber Oil Sample Color Kit has a 2 oz bottle of each of its five pigmented colors, and the $15 comes off a full order. The testing guide goes through it step by step.
Can I put semi-transparent stain over solid stain?
Semi-transparent stain can’t go over solid stain until the solid stain is completely removed. Cleaning the deck is not enough. The way back to bare wood is a caustic stripper, then a citric acid brightener, then the new stain. If your deck has a thick resurfacer such as Behr DeckOver or Olympic Rescue It, text a photo to the Woodrich Project Support Hotline at (636) 288-8512 before you buy anything.
How many coats of deck stain do I need?
That depends on the type of stain. Film-forming stains such as solid stain build up in coats. Penetrating oil stains go on in applications instead: the wood absorbs what it can, and once it stops, any extra sits on the surface and turns tacky. Follow the maker’s directions for how many applications to use.
Which brands make gray deck stain?
Woodrich, which runs this site, makes no gray stain, but several other brands do. Armstrong Clark (Driftwood gray) and TWP make gray in oil-based penetrating stains. Ready Seal makes it in an oil-based semi-transparent stain, and Defy makes Driftwood Gray in a water-based stain. The gray deck stain guide compares them.
Can you stain composite decking?
Composite decking such as Trex, TimberTech, Azek or Fiberon does not take stain. Follow the decking maker’s care instructions. If you want a coating, Defy makes a composite deck sealer.
